<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#ffffff">
Hi!<br>
<br>
I'm new to etherlab, and in the process of setting up my first master.<br>
<br>
My system.<br>
OS: Fedora 12<br>
Kernel: 2.6.31.5-127<br>
Ethernet card: Intel Corporation 82567LF Gigabit Network Connection
(rev 03)<br>
<br>
<br>
Tried to set up the installation of ethercat 1.4.0 with the following
command:<br>
<i>./configure --enable-e1000 --disable-8139too --enable-cycles</i><br>
<br>
This gave me the output:<br>
<i>checking for Linux kernel sources...
/usr/src/kernels/2.6.31.12-174.2.3.fc12.i686 (Kernel
2.6.31.12-174.2.3.fc12.i686)<br>
checking for kernel for e1000 driver... configure: error: kernel 2.6.31
not available for e1000 driver!</i><br>
<br>
The command <i>lsmod | grep e1000</i>, gives me this output:<br>
<i>e1000e 133776 0 <br>
<br>
</i>When checking the web page i found that version 1.4.0 only supports
the driver up until kernel 2.6.24.<br>
<br>
<b>THE QUESTION:</b> Should I somehow install kernel 2.6.24 on my
system, or try using the 1.5 master with kernel 2.6.29?<br>
<br>
Appreciate any help...<br>
<br>
//John<br>
</body>
</html>