<html><head></head><body>Thank you Richard, I did not know about that parameter. The debug information, however does not mention the block. It only gives me a few warnings of unconnected in-/outputs of other blocks, no errors whatsoever.<br>
<br>
I am using Etherlab 1.3-pre 14-Sep-2010<br>
<br>
Best Regards,<br>
Jasper<br>
<br><br><div class="gmail_quote"><br>
<br>
Richard Hacker <ha@igh.de> schrieb:<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<pre class="k9mail">Hello Jasper,<br /><br />click on the block to select it, then call<br />set_param(gcb,'debug','1')<br />from the matlab prompt and update your model. Check the debug <br />information of the slave to see whether your configuration worked.<br /><br />What version of etherlab are you using?<br /><br />- Richard<br /><br />Am 11/11/2013 09:42 AM, schrieb Jasper Westpfahl:<br /><blockquote class="gmail_quote" style="margin: 0pt 0pt 1ex 0.8ex; border-left: 1px solid #729fcf; padding-left: 1ex;">Hello Etherlab users,<br /><br />I am trying to configure the EL6692 connector from a Simulink model with<br />a generic block and a device description xml to transmit various data<br />between two masters. Neither Simulink nor dmesg throw any errors, but<br />the RxPdo that are supposed to be configured do not show up on 'ethercat<br />pdo -p 9' . The TxPdo do, with the exception of the last 'stuffing' byte<br />(for alignment), show up. I have attached the xml and the output of<br />'ethercat pdo -p 9' in the hope that someone can have a quick look and<br />give me a pointer. I would appreciate it. Thanks.<br /><br />Best regards,<br />Jasper Westpfahl<br /><br /><br /># ethercat pdo -p 9<br /><br />SM0: PhysAddr 0x1000, DefaultSize 256, ControlRegister 0x26, Enable 1<br />SM1: PhysAddr 0x1100, DefaultSize 256, ControlRegister 0x22, Enable 1<br />SM2: PhysAddr 0x1200, DefaultSize 0, ControlRegister 0x24, Enable 1<br />RxPDO 0x1600 "RxPDO-Map"<br />SM3: PhysAddr 0x1800, DefaultSize 20, ControlRegister 0x20, Enable 1<br />TxPDO 0x1a03 ""<br />PDO entry 0x10f4:02, 2 bit, ""<br />PDO entry 0x0000:00, 6 bit, ""<br />PDO entry 0x0000:00, 3 bit, ""<br />PDO entry 0x1800:09, 1 bit, ""<br />PDO entry 0x1800:07, 1 bit, ""<br />PDO entry 0x10f4:0e, 1 bit, ""<br />PDO entry 0x10f4:0f, 1 bit, ""<br />PDO entry 0x10f4:0a, 1 bit, ""<br />PDO entry 0x10f4:0b, 32 bit, ""<br />PDO entry 0x10f4:0c, 32 bit, ""<br />PDO entry 0x10f4:0d, 32 bit, ""<br />TxPDO 0x1a00 "TxPDO-Map"<br />PDO entry 0x6000:01, 32 bit, ""<br />PDO entry 0x6000:02, 32 bit, ""<br />PDO entry 0x6000:03, 64 bit, ""<br />PDO entry 0x6000:04, 64 bit, ""<br />PDO entry 0x6000:05, 64 bit, ""<br />PDO entry 0x6000:06, 64 bit, ""<br />PDO entry 0x6000:07, 64 bit, ""<br />PDO entry 0x6000:08, 64 bit, ""<br />PDO entry 0x6000:09, 1 bit, ""<br />PDO entry 0x6000:0a, 1 bit, ""<br />PDO entry 0x0000:00, 6 bit, ""<br /><br /><br /><hr /><br />etherlab-users mailing list<br />etherlab-users@etherlab.org<br /><a href="http://lists.etherlab.org/mailman/listinfo/etherlab-users">http://lists.etherlab.org/mailman/listinfo/etherlab-users</a></blockquote><br /><br />Mit freundlichem Gruß<br /><br />Richard Hacker<br /></pre></blockquote></div></body></html>