<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">
<DIV>Hi all,</DIV>
<DIV> </DIV>
<DIV>I am trying to install the Ethercat-Master on a Raspberry Pi.</DIV>
<DIV> </DIV>
<DIV>I downloaded the tarball from the Etherlab site with ‘wget ....’ and did
everything according to the intsructions.</DIV>
<DIV>For ‘./configure --disable-e8139too’ it was necessary to download
linux-headers for my kernel version 3.12.28+.</DIV>
<DIV>After this everything was working (make, make modules, make install, make
modules_install, cp...., ln...., insserv)</DIV>
<DIV> </DIV>
<DIV>However, if I try to start the service (/etc/init.d/ethercat) with
‘sudo ./ethercat start’ it says:</DIV>
<DIV> </DIV>
<DIV> Starting EtherCAT master 1.5.2
ERROR: could not insert ‘ec_master’: Exec format error</DIV>
<DIV>
failed</DIV>
<DIV> </DIV>
<DIV>Vermagic of ‘modinfo iptable_nat’ and of ‘modinfo ec_master’ are exactly
the same.</DIV>
<DIV> </DIV>
<DIV>I don’t know what I’m doing wrong, because I’m not very experienced
regarding kernel modules.</DIV>
<DIV>I am grateful about all kind of help.</DIV>
<DIV> </DIV>
<DIV>Best Regards,</DIV>
<DIV>Thomas</DIV>
<DIV> </DIV>
<DIV> </DIV></DIV></DIV></BODY></HTML>