<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>I see the FBUS.SAMPLEPERIOD parameter is set to 128. The unit is labeled "*62.5us", which would make the period 8000us? Yikes!</div><div id="AppleMailSignature">The manual describes the default value of 32 as equal to a 2ms sample period. 32 * 62.5us = 2000us</div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">It seems I've had the sample period set to 8ms this whole time, I must have just been lucky that it worked at all up to this point. </div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">Thanks!<br><br><div><span style="font-size: 13pt;">Alyssa</span></div></div><div><br>On Aug 22, 2016, at 2:30 PM, Dusty Clark <<a href="mailto:springender@gmail.com">springender@gmail.com</a>> wrote:<br><br></div><blockquote type="cite"><div><div dir="ltr">There is an AKD parameter, FBUS.SAMPLETIME that sets the internal packet sampling rate on the EtherCAT connection. If you are also getting a random Error 125 (fieldbus sync lost) when the feedback freezes, there's a good chance you need to tweak the setting. It's unclear that you have the PDO mapped to read the position with your faster version?<div><br></div><div>Good luck!</div><div><br></div><div>Dusty</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Aug 22, 2016 at 12:15 PM, Alyssa Wells <span dir="ltr"><<a href="mailto:Alyssa.Wells@custom-pak.com" target="_blank">Alyssa.Wells@custom-pak.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><u></u>
<div>
<p><font size="2">Just wondering if anyone else has had an experience with EtherCAT communications where sending command positions works fine, the drive responds and goes to the position, but the drive does not send back feedback on its current position.<br>
<br>
Using 1.5.2 on RT Debian system, talking to Kollmorgen AKD drives CoE<br>
<br>
Communications are good both ways at loop speeds of ~2ms, lowering the speed of the loop to ~1ms causes the feedback to freeze.<br>
<br>
<br>
Thanks,<br>
Alyssa<br>
<br>
<br>
</font>
</p>
</div>
<br>______________________________<wbr>_________________<br>
etherlab-users mailing list<br>
<a href="mailto:etherlab-users@etherlab.org">etherlab-users@etherlab.org</a><br>
<a href="http://lists.etherlab.org/mailman/listinfo/etherlab-users" rel="noreferrer" target="_blank">http://lists.etherlab.org/<wbr>mailman/listinfo/etherlab-<wbr>users</a><br>
<br></blockquote></div><br></div>
</div></blockquote></body></html>