<html><head></head><body><div>Hello,</div><div><br></div><div>No, this is original IgH stable-1.5 branch.</div><div><br></div><div>Best regards</div><div><br></div><div>Andreas</div><div><br></div><div>Am Montag, dem 19.09.2022 um 14:40 +0300 schrieb Raz:</div><blockquote type="cite" style="margin:0 0 0 .8ex; border-left:2px #729fcf solid;padding-left:1ex"><div dir="ltr">Hey Mike<div>Is this source inclues Gavin Lambert fixes as well ? </div></div><div><br></div><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Sep 19, 2022 at 2:26 PM Mike O'Connor <<a href="mailto:mike@oeg.com.au">mike@oeg.com.au</a>> wrote:<br></div><blockquote type="cite" style="margin:0 0 0 .8ex; border-left:2px #729fcf solid;padding-left:1ex"><div>Hi Henrik<br></div><div><br>I think you should really look at the work done at<br></div><div><a href="https://build.opensuse.org/package/show/home:bone11111:branches:science:EtherLab/ethercat" rel="noreferrer" target="_blank">https://build.opensuse.org/package/show/home:bone11111:branches:science:EtherLab/ethercat</a><br>You use this to download all the packages and tool as binaries, removing <br>your issues.<br></div><div><br>Cheers<br>Mike<br></div><div><br></div><div><br>On 19/9/2022 8:47 pm, Henrik Barie wrote:<br>> Hello Mike and Andreas,<br>><br>> at this location I could only find the ethercatctl-file.<br>> However I think I found the right file now in <br>> /usr/src/etherlanmaster-code/tools. The file is named "ethercat" and I <br>> also found several .o-files with etherlab commands like "master". <br>> Executing it with sudo ./ethercat master worked and the output was <br>> (after starting with "systemctl start ethercat"):<br>><br>><br>> Master0<br>> Phase: Idle<br>> Active: no<br>> Slaves: 4<br>> Ethernet devices:<br>> Main: 88:a4:c2:bf:73:10 (attached)<br>> Link: UP<br>> Tx frames: 45398<br>> Tx bytes: 2782824<br>> Rx frames: 45397<br>> Rx bytes: 2782764<br>> Tx errors: 0<br>> Tx frame rate [1/s]: 479 662 523<br>> Tx rate [KByte/s]: 28.1 39.2 31.3<br>> Rx frame rate [1/s]: 479 662 523<br>> Rx rate [KByte/s]: 28.1 39.2 31.3<br>> Common:<br>> Tx frames: 45398<br>> Tx bytes: 2782824<br>> Rx frames: 45397<br>> Rx bytes: 2782764<br>> Lost frames: 0<br>> Tx frame rate [1/s]: 479 662 523<br>> Tx rate [KByte/s]: 28.1 39.2 31.3<br>> Rx frame rate [1/s]: 479 662 523<br>> Rx rate [KByte/s]: 28.1 39.2 31.3<br>> Loss rate [1/s]: 0 -0 0<br>> Frame loss [%]: 0.0 -0.0 0.0<br>> Distributed clocks:<br>> Reference clock: Slave 0<br>> DC reference time: 0<br>> Application time: 0<br>> 2000-01-01 00:00:00.000000000<br>><br>> and for "slaves":<br>><br>> 0:0 PREOP + EK1100 EtherCAT-Koppler (2A E-Bus)<br>> 1 0:1 PREOP + EL1104 4K. Dig. Eingang 24V, 3ms, Sensorversorgung<br>> 2 0:2 PREOP + EL2004 4K. Dig. Ausgang 24V, 0.5A<br>> 3 0:3 PREOP + EL3062 2K.Ana. Eingang 0-10V<br>><br>><br>> I tried my Simulink Model again but it still doesnt work.<br>> I will attach a Screenshot of it.<br>><br>> I attached a cable from Input 2 of EL1104 (which is +24 V) to Output 1 <br>> of EL2004. The LED of EL2004 Output should now be on since it recieves <br>> 24V.<br>><br>> I used Slave Index 1 for the EL1104 and Index 2 for the EL2004 as it <br>> was shown in the Terminal.<br>><br>> Master is 0 and Vector Outputs enabled.<br>><br>> Also the Master State-Module doesnt show any outputs.<br>><br>><br>><br>> Regards<br>> Henrik<br>><br>><br></div><div><br></div></blockquote></div></blockquote><div><br></div><div><span></span></div></body></html>