<html><head></head><body><div>Dear Henrik,</div><div><br></div><div>The source are git managed</div><div><br></div><div>Try</div><div><br></div><div>git checkout stable-1.5</div><div><br></div><div><br></div><div>You are using a moden OS, please use the systemd interface.</div><div><br></div><div>Following steps</div><div>1. Install the Master</div><div>2. Modify /etc/sysconfig/ethercat</div><div>3. Start the master via systemctl start ethercat</div><div>4. Call ethercat ma for master state</div><div>5. Call ethercat sl for list of slaves</div><div><br></div><div>Alternativ you can install by package manager</div><div><br></div><div>Have a look at </div><div><a href="https://build.opensuse.org/project/show/home:bone11111:branches:science:EtherLab">https://build.opensuse.org/project/show/home:bone11111:branches:science:EtherLab</a></div><div><br></div><div>For the master you only have to installer the kernel headers for your kernel. The master and the device drivers are compiled by DKMS.</div><div><br></div><div>Best regards</div><div><br></div><div>Andreas</div><div><br></div><div>Am Montag, dem 19.09.2022 um 10:09 +0200 schrieb Henrik Barie:</div><blockquote type="cite" style="margin:0 0 0 .8ex; border-left:2px #729fcf solid;padding-left:1ex"><div>Hello Mr. Stewering-Bone,<br></div><div><br></div><div>the branch update was part of the Installation-Guide which I followed,<br></div><div>but it didnt work.<br></div><div>The command was "hg update stable-1.5" and the output was/is:<br></div><div><br></div><div>Abort: No Project Archive (.hg Archive) in <br></div><div>/home/ec/EtherCAT/etherlabmaster-code found<br></div><div><br></div><div>when I searched for a .hg file I couldnt find anything.<br></div><div><br></div><div>"ip a" gave out this:<br></div><div><br></div><div>1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN <br></div><div>group default qlen 1000<br></div><div> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00<br></div><div> inet 127.0.0.1/8 scope host lo<br></div><div> valid_lft forever preferred_lft forever<br></div><div> inet6 ::1/128 scope host<br></div><div> valid_lft forever preferred_lft forever<br></div><div>2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel <br></div><div>state UP group default qlen 1000<br></div><div> link/ether 88:a4:c2:bf:73:10 brd ff:ff:ff:ff:ff:ff<br></div><div> inet6 fe80::cf2:e741:d753:1437/64 scope link noprefixroute<br></div><div> valid_lft forever preferred_lft forever<br></div><div>3: wlp0s20f3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue <br></div><div>state UP group default qlen 1000<br></div><div> link/ether 80:38:fb:ae:68:70 brd ff:ff:ff:ff:ff:ff<br></div><div> inet 192.168.178.69/24 brd 192.168.178.255 scope global dynamic <br></div><div>noprefixroute wlp0s20f3<br></div><div> valid_lft 863048sec preferred_lft 863048sec<br></div><div> inet6 fe80::eaf5:3c97:a587:60d7/64 scope link noprefixroute<br></div><div> valid_lft forever preferred_lft forever<br></div><div><br></div><div><br></div><div>ethercat ma:<br></div><div><br></div><div>command not found<br></div><div><br></div><div>ethercat sl:<br></div><div><br></div><div>command not found<br></div><div><br></div><div>also the ethercat init.d script only offers "start", "stop", "restart" <br></div><div>and "status".<br></div><div><br></div><div>I figured out that when I use the command:<br></div><div><br></div><div>/etc/init.d/ethercat status<br></div><div><br></div><div>the output is "Master0 dead"<br></div><div><br></div><div>but when I use:<br></div><div><br></div><div>sudo /etc/init.d/ethercat status<br></div><div><br></div><div>the output is:<br></div><div><br></div><div>"Master0 running"<br></div><div><br></div><div><br></div><div>Regards<br></div><div>Henrik<br></div></blockquote><div><br></div><div><span></span></div></body></html>