<html><head></head><body>Pleased note you are running etherlab 1.3, I am sure. The Code generation will create a userspace executeable.<br><br>The runtime failure says that you did not set a cycle time in the model properties. You should set Something Like 0.001 s.<br><br>Try it<br><br>Best regards<br><br>Andreas <br><br><div class="gmail_quote">Am 2. März 2023 15:46:09 MEZ schrieb Henrik Barie <henrik.barie@ei.thm.de>:<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<pre dir="auto" class="k9mail">Dear Etherlab-users,<br><br><br>I have a problem trying to run the generated code of my Simulink model, where I<br>used 2 Beckhoff-Blocks:<br>I connected an EL1104 to an EL2004, built the code and it generated several files. By searching I found out that the generated file that has no ending (like .c or .o) must be executed in the terminal to run the code (I didnt get a kmod.ko file like described in the etherlab-1.2.pdf). When I run this file (EtherlabTest) with ./ , I get an error message saying:<br><br>"EtherlabTest: /usr/share/etherlab/src/hrt_main.c:1447: main: Assertion 'ts != 0.0' failed<br>Aborted"<br><br>Im not even sure if this is the correct way to make the model I created work with Ethercat-Master. My setup is an EK1100 connected to a powersupply and attached to the EK1100 I have an EL1104, an EL2004 and an EL3062. The EL1104 is connected from its Input 2 to the Output 1 of the EL2004. My goal is to send a signal from the EK1104 to the EL2004 by making and running a Simulink model with Etherlab.<br><br>maybe someone has made a similar model already and can help me with this problem?<br><br><br><br>Kind Regards<br>Henrik<br></pre></blockquote></div></body></html>