[etherlab-dev] etherlab-dev Digest, Vol 7, Issue 7

[Bidkar, Pavan]

Hi,
When I am going through the EtherCAT code, I fond that there is no
main() function, that means there is no entry point for master?

Can you please suggest me how this is done, and how Kernel recognizes
the driver and starts it?

Thanks,
Pavan 
-----Original Message-----
From: etherlab-dev-bounces at lists.etherlab.org
[mailto:etherlab-dev-bounces at lists.etherlab.org] On Behalf Of
etherlab-dev-request at lists.etherlab.org
Sent: Friday, June 20, 2008 3:30 PM
To: etherlab-dev at lists.etherlab.org
Subject: etherlab-dev Digest, Vol 7, Issue 7

Send etherlab-dev mailing list submissions to
	etherlab-dev at lists.etherlab.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.etherlab.org/mailman/listinfo/etherlab-dev
or, via email, send a message with subject or body 'help' to
	etherlab-dev-request at lists.etherlab.org

You can reach the person managing the list at
	etherlab-dev-owner at lists.etherlab.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of etherlab-dev digest..."


Today's Topics:

   1. Re: EtherCAT-Master on linux-2.6.24 (Preempt-RT) (Florian Pose)


----------------------------------------------------------------------

Message: 1
Date: Thu, 19 Jun 2008 14:45:54 +0200
From: Florian Pose <fp at igh-essen.com>
Subject: Re: [etherlab-dev] EtherCAT-Master on linux-2.6.24
	(Preempt-RT)
To: etherlab-dev at lists.etherlab.org
Message-ID: <20080619124554.GC22780 at yak.igh-essen.int>
Content-Type: text/plain; charset=us-ascii

On Wed, Jun 18, 2008 at 02:40:32PM +0200, Mehlan, Markus (Ritter
Elektronik) wrote:
> The MPC5200 is a Freescale chip with MPC603e series PowerPC processor
core.
> I build the kernel with arch=powerpc.

I know of a few systems that run on PowerPC, so this should be no
problem.

-- 
Best regards,
Florian Pose

http://etherlab.org


------------------------------

_______________________________________________
etherlab-dev mailing list
etherlab-dev at lists.etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-dev


End of etherlab-dev Digest, Vol 7, Issue 7
******************************************