[etherlab-dev] Module ec_8139too for kernel version 2.6.22

[Florian Pose]

Hi Erwin,

On Thu, Jan 17, 2008 at 10:43:06AM +0100, Erwin Burgstaller wrote:
> I've started to play around with the master and because I'm already
> using kernel 2.6.22 and rtai-3.6-test3, I needed a module to support at
> least the RTL-8139 Ethernet adapter cards.
> 
> So I took the code out of the 2.6.22 package and added the changes which
> were done to 8139too-2.6.19-ethercat.c
> 
> I'm not sure if I have everything ported correctly, all I can test at
> the moment is, if the original master code is working in pure Ethercat
> environment. I mean the Ethercat master starts and lsec shows everything
> correctly. Putting down the master and up again is working also without
> problems.
> 
> I suppose, attachment's are not working with this mailing list, but I'll
> try anyway. If it doesn't, feel free to request the code per e-mail. My
> address is working as it is.

thanks a lot for the porting! I'll have a look at it and include it in
the next release.

-- 
Best regards,
Florian Pose

http://etherlab.org