[etherlab-dev] r1713 - Distributed Clocks IOCTL functions

Florian Pose fp at igh-essen.com
Mon Apr 27 12:06:01 CEST 2009


Hi,

On Mon, Apr 27, 2009 at 11:28:06AM +0200, Erwin Burgstaller wrote:
> * Fri, Apr 24, 2009 - 15:17:09 +0200, Florian Pose - fp at igh-essen.com:
> > Hi again,
> > 
> > does the attached patch make any difference?
> > 
> > If not, please post the output of "ethercat slave -v", another reason
> > could be a 32/64 bit DC problem.
> 
> Sorry no, there's no difference. I sucessfully patched devel-r1718. 
> 
> I've attached the syslog file contents from running up (power on) the
> EK1100 being just alone on the bus and with debug level set to 2.
> 
> Here's the output from ethercat -v. Ss you can see, the output from
> slave 1 (EL2004) is the same for DC, but the error is only with device 0

mhmm, could you please try the following commands?

ethercat reg_read -p0 -tuint64 0x0910
ethercat reg_read -p0 -tuint64 0x0918
ethercat reg_read -p0 -tuint64 0x0920

Does any of them fail?

-- 
Best regards,
Florian Pose

http://etherlab.org



More information about the Etherlab-dev mailing list