[etherlab-dev] driver for 2.6.3x

[Andreas Stewering-Bone]

Hello Armin,

You can compile the master with the option  --enable-debug-if to get an 
readonly virtual network device to listen to the ethercat traffic via 
libpcap or wireshark.

You can use the generic driver with the option --enable-generic. Please 
note this driver is only useable under vanilla or preempt kernel.

If you use RTAI or Xenomai you need a native driver.

Which kernel version and nic driver do you need?

Regards

Andreas



Am 13.04.2011 16:13, schrieb Armin Steinhoff:
> Hello,
>
> is there an interface to an ethernet device available which is based 
> on the library "libpcap" ??
> What about the UIO interface ??
>
> Just to limit the dependency to the kernel versions ...
>
> Regards
>
> --Armin
>
>
> _______________________________________________
> etherlab-dev mailing list
> etherlab-dev at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-dev


Mit freundlichem Gruß

Andreas Stewering-Bone

-- 
------------------------------------------------------------------------

Dipl.-Ing.(FH) Andreas Stewering-Bone
andreas.stewering-bone at igh-essen.com
Tel.: +49 201 / 36014-15

Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Heinz-Bäcker-Str. 34
D-45356 Essen
Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschäftsführung:
- Dr.-Ing. S. Rotthäuser,
- Dr.-Ing. T. Finke,
- Dr.-Ing. W. Hagemeister
Tel.: +49 201 / 360-14-0
http://www.igh-essen.com

------------------------------------------------------------------------