[etherlab-dev] Is Ethercat Master Enough

[Mohamed Abuthahir]

Hi Wilhelm,

Thanks for your reply,

Would you tell me where i can find the sample program in etherlab.org site.
(Especially i need to control the servo motor through yaskawa sigma 5
amplifier )



-------------------------------------------
Thahir

On Thu, May 24, 2012 at 11:40 AM, Dr.-Ing. Wilhelm Hagemeister <
hm at igh-essen.com> wrote:

> Hallo Mohamed,
>
> no, the Master "only" handles the EtherCAT communication. You need to
> write a control program yourself. The various ways to do this are
> described on www.etherlab.org.
>
> Regards Wilhelm.
>
> Am 24.05.2012 09:18, schrieb Mohamed Abuthahir:
> > Any one there to answer me ?
> >
> >
> > ---------------------------------------
> > Thahir
> >
> > On Wed, May 23, 2012 at 5:29 PM, Mohamed Abuthahir <thahir1986 at gmail.com
> >wrote:
> >
> >> HI,
> >>
> >>
> >> I know it's a  very basic question. To control a servo motor, Is
> ethercat
> >> Master enough  or i need to download some other components from the
> >> etherlab site ?
> >>
> >>
> >>
> >> -------------------------------------
> >> Thahir
> >>
> >
> >
> >
> > _______________________________________________
> > etherlab-dev mailing list
> > etherlab-dev at etherlab.org
> > http://lists.etherlab.org/mailman/listinfo/etherlab-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-dev/attachments/20120524/01594053/attachment-0004.htm>