[etherlab-dev] Sharing of FEC 3.0 driver

호탐탄 thanhtam.ho at neuromeka.com
Sat Aug 18 14:10:06 CEST 2018

I am sharing my patched FEC driver for kernel 3.0.
* Current driver status​:
- It works well for iMX6 quad with cpu affinity
- Has been tested for long time with many types of EtherCAT slave include Elmo, MAXPOS, Yaskawa Sigma V,  Servotronix,...
* Current issue:
- If I didn't do cpu isolation and affinity, system will be halted after few fours running. 
Since I don't have time for this project, let's try and share a fix if you found solution. 
Hope this is useful for someone.
Ho Tam,

이 메일은 지정된 수취인만을 위해 작성되었으며, 중요한 정보나 저작권을 포함하고 있을 수 있습니다. 어떠한 권한 없이, 본 문서에 포함된 정보의 전부 또는 일부를 무단으로 제3자에게 공개, 배포, 복사 또는 사용하는 것을 엄격히 금지합니다. 만약, 본메일이 잘못 전송된 경우, 발신인 또는 당사에 알려주시고, 본 메일을 즉시 삭제하여 주시기 바랍니다.  
This E-mail may contain confidential information and/or copyright material. This email is intended for the use of the addressee only. If you receive this email by mistake, please either delete it without reproducing, distributing or retaining copies thereof or notify the sender immediately.  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-dev/attachments/20180818/8bd307be/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fec-ethercat-3.0-driver.zip
Type: application/zip
Size: 24804 bytes
Desc: not available
URL: <http://lists.etherlab.org/pipermail/etherlab-dev/attachments/20180818/8bd307be/attachment-0003.zip>

More information about the Etherlab-dev mailing list