[etherlab-users] Setting a port to open

[Aaron Edsinger]

Hello. I am trying to set port 3 on the ET1200 to open, or auto. By 
default it is set to closed, and the master must manually set it to open 
by changing bits 15/14 in register 0x0100 on the ET1200. Has anyone done 
this with success? Or can someone suggest the proper way to patch the 
EtherLab master to do this? I have modified fsm_slave.c (by adding a new 
fsm state) to do this but without any luck.

Thanks!
--Aaron

-- 
Aaron Edsinger, Ph.D.
San Francisco, CA
www.mekabot.com
www.csail.mit.edu/~edsinger