[etherlab-users] Need help

[Vishal]

Hello!I am new to this ethercat forum and would like to know the following..hope to get a positive reply.I have install the Ethercat master under linux....and have connected the ethercat slave...but when i run the master using the command /etc/init.d/ethercat start ...i get the following message.... kernel: EtherCAT: Master driver 1.3.2 stable r980 kernel: EtherCAT: 0 masters waiting for devices. kernel: EtherCAT: Master module cleaned up. kernel: EtherCAT: Master driver 1.3.2 stable r980 kernel: EtherCAT: 0 masters waiting for devices. kernel: EtherCAT: Master module cleaned up. kernel: EtherCAT: Master driver 1.3.2 stable r980 kernel: EtherCAT: 1 master waiting for devices. kernel: ACPI: PCI interrupt for device 0000:05:04.0 disabled kernel: ec_8139too EtherCAT-capable Fast Ethernet driver 0.9.27, master 1.3.2 stable r980 kernel: PCI: Enabling device 0000:05:04.0 (0000 -> 0003) kernel: ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 17 (level, low) -> IRQ 177 kernel: eth0: RealTek RTL8139 at 0xb800, 00:e0:4c:58:dd:17, IRQ 177 kernel: eth5: link up, 100Mbps, full-duplex, lpa 0x41E1 kernel: eth5: link down kernel: eth5: link up, 100Mbps, full-duplex, lpa 0x45E1 kernel: ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready kernel: eth5: link down kernel: eth5: link up, 100MbpI donot know what is wrong ..it does not detect the ethercat slave.Also , on the website there is no documentation for the version ethercat -1.3.2....which version and document one has to follow.And the examples given when compiled gives error  i use the command , for eg: gcc mini.c   is it correct or something else has to be done.....thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20080207/76c066f5/attachment-0002.htm>