[etherlab-users] Logging & Trigger functionality

[Nureddin Bennett]

Hi,
for a test rig i need to have a logging functionality with short latency
  trigger functionality. I am experimenting with a Opensuse box,
realtime process and data logging service are running on the same box.
However the results i get when triggering show different latency times.
Also, what i'd like to have is a new logging file for every time the
trigger is activated, logging should continue until trigger is unset.

I could switch on / off the trigger from within the simulink model using
a constant. The value of the constant i changed through the testmanager
interface. For some reason i didn't get it to start/stop when i used a
Signal in the model as a trigger.

If someone would suplly me with some information about these issues, i'd
be very thankfull.

Regards,

Nureddin Bennett