[etherlab-users] further investigations on NetX500 slave

[Florian Pose]

Hi again,

On Thu, Mar 06, 2008 at 10:34:04AM +0100, Florian Pose wrote:
> The write operation of the 41th word fails (second octat 0x40 = Write
> Error). That would support my theory, that only 40 words are supported.
> I'll have a telephone call to Hilscher...

I spoke to my Hilscher contact and he told me, that if you are using a
special older slave, the SII addressable area can be very small. Please
contact the Hilscher support for this, because this can be clarified
only, when the exact slave type is known. The support request will
hopefully end up at my contact's desktop.

I'm wondering if something can be done on the master side. There is a
size field in the SII data, that specifies the complete size of the
memory behind the SII. Could you please post the two different EEPROM
contents either gzipped in binary form or piped through 'hexdump -C'?

-- 
Best regards,
Florian Pose

http://etherlab.org