[etherlab-users] problem in writing alias with command line tool

[Florian Pose]

Hi,

On Wed, Oct 22, 2008 at 05:05:52PM +0200, Quirino Nardin wrote:
> ec master version 1529 (1.4.0.rc3)
> command for writing alias does not return (must press ctrl+c)
> ./ethercat alias -p 0 1000

is slave 0 online? The only way to reproduce this is when the Ethernet
link is down. Unfortunately the slave list is not cleared then. I will
fix this in 1.5.

Another reason might be that you have an application loaded, that runs
with a very slow frame rate. It may take very long to write the EEPROM
then.

-- 
Best regards,
Florian Pose

http://etherlab.org