[etherlab-users] WG: Beckhoff AX200/Danaher S600

[Florian Pose]

On Tue, Oct 28, 2008 at 02:06:13PM +0100, Florian Pose wrote:
> the ec_slave2 s-Function complains about the SM3, because the XML sais
> it is used for mailbox communication (the right '2' in #x22 means
> reading access, mailbox). This is probably a mistake in the XML. If you
> set this to '#x20', it shall work.

BTW, this may also be the reason for the slave rejecting the sync
manager configuration...

-- 
Best regards,
Florian Pose

http://etherlab.org