[etherlab-users] EtherCAT newbie - NXIO 100-RE

[Fuchs Clemens]

Hi all,
 
I'm a bloody EtherCAT newbie and I'd like to implement a simple
application, which communicates with the NXIO 100-RE board, which has 16
digital in-/ and outputs. Via the ethercat utility I exported the slave
configuration to XML (see attachment) and I tried to adapt the user
example, to communicate with the board - without any succes right now.
 
Could anyony give me some hints, how I have to proceed?
 
thanks,
Clemens

Important Notice:
This electronic transmission (including any attachments) is intended solely for the use and information
of the addressee(s). It may contain confidential or legally privileged information. Any unauthorized use
or disclosure of this message is strictly prohibited.If you are not the intended recipient, please notify
the sender immediately and delete the message and its attachments.
The sender does not guarantee the integrity of this transmission and shall therefore never be liable if
the message is altered or falsified nor for any virus, interception or damage to your system.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20090212/e1ae9c0f/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nxio100re.xml
Type: text/xml
Size: 1366 bytes
Desc: nxio100re.xml
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20090212/e1ae9c0f/attachment-0002.xml>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: main.cpp
Type: application/octet-stream
Size: 12466 bytes
Desc: main.cpp
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20090212/e1ae9c0f/attachment-0003.obj>