[etherlab-users] Ethercat master on PowerPC

[Henry Bausley]

I have successfully cross compiled the EtherCAT master for PowerPC, it does 
seem to work and can see devices on the wire.  I am using a RTL8101E PCI 
Express adapter  (r8169)..

root at 10.34.9.210:/opt/ppmac# ethercat slaves
0  0:0  INIT  E  EL9800 (V4.08) (SPI, ET1100)
root at 10.34.9.210:/opt/ppmac# uname -a
Linux powerpmac 2.6.28.8 #17 Thu Jun 11 14:58:37 PDT 2009 ppc GNU/Linux
root at 10.34.9.210:/opt/ppmac#



----- Original Message ----- 
From: "Florian Pose" <fp at igh-essen.com>
To: <etherlab-users at etherlab.org>
Sent: Monday, June 15, 2009 11:52 PM
Subject: Re: [etherlab-users] Ethercat master on PowerPC


> Hi,
>
> On Tue, Jun 09, 2009 at 09:51:22AM +0200, Kim H. Madsen wrote:
>> Has anyone tried building the EtherCAT master for PowerPC?
>
> not here at IgH, but I was told by people who successfully built it on
> ARM, which is also big-endian. I can't imagine, why it shouldn't work.
>
> -- 
> Best regards,
> Florian Pose
>
> http://etherlab.org
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
> 




**********************************************************
Outbound scan for Spam or Virus by Barracuda at Delta Tau
**********************************************************