[etherlab-users] ethercat config

[Kim H. Madsen]

Shouldn't "ethercat config" always give an output with at least line per. Slave?

 

I have this output:

~ # ethercat slaves

0  0:0  PREOP  +  EK1100 EtherCAT-Koppler (2A E-Bus)

1  0:1  PREOP  +  EL2004 4Ch. Dig. Output 24V, 0.5A

2  0:2  PREOP  +  EL1034 4Ch. Dig. Input 24V, potential-free, 10µs

3  0:3  PREOP  +  EL1004 4Ch. Dig. Input 24V, 3ms

4  0:4  PREOP  +  EL2004 4K. Dig. Ausgang 24V, 0.5A

5  0:5  PREOP  +  EL2004 4K. Dig. Ausgang 24V, 0.5A

~ # ethercat config

~ #

Do I have a master/commandlinetool problem?

 

Best regards 

Kim Hedegaard Madsen 
DEIF Wind Power Technology
Developer

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20100414/22661a36/attachment-0003.htm>