[etherlab-users] Etherlab-1.2rc10 make problem
Richard Hacker
ha at igh-essen.com
Tue Dec 14 09:12:43 CET 2010
Hello,
please send me the output of
make VERBOSE=1
as well as the file kernel-cflags.c
Richard
PS: Please do not contact us directly, but use the mailing list so that all
can profit from the results
On Monday 13 December 2010 16:11:46 you wrote:
> Hallo Richard,
>
> kannst Du den beiden Antworten.
>
> Bemerke es sind Studenten des RTAILAB Entwicklers.
>
> Gruß
>
> Andreas
> -------- Original-Nachricht --------
> Betreff: Etherlab-1.2rc10 make problem
> Datum: Fri, 10 Dec 2010 16:49:11 +0100
> Von: Luca Bovino <luca.bovino at gmail.com>
> An: ab at igh-essen.com
>
>
>
> Dear Dipl.-Ing. Andreas Stewering-Bone,
>
> we are two students from SUPSI in Manno (Swiss) and we are currently
> working with an RTAI project. Our teacher Roberto Bucher told us that
> we could write to you.
>
> We have to configure our laptop with Ethercat and Etherlab.
> We successfully installed the first one, but we are encountering some
> problems with Etherlab during the installation.
>
> When we try to run the "make" command, we get plenty of errors (see
> attachment).
>
> Here are the specifics:
> - RTAI Vulcano
> - Kernel 2.6.29.4-ipipe
> - Ethercat 1.4
> - Etherlab 1.2-rc10
>
> We really don't know what the problem could be.
>
> Could you tell us what kernel and etherlab release do we have to use?
>
>
> Thank you for the attention,
>
> best regards
>
--
------------------------------------------------------------------------
Richard Hacker Amtsgericht Essen HRB 11500
Ingenieurgemeinschaft IgH USt-Id.-Nr.: DE 174 626 722
Ges. für Ingenieurleistungen mbH Geschäftsführung:
Heinz-Baecker-Str. 34 Dr.-Ing. S. Rotthäuser
D-45356 Essen Dr.-Ing. T. Finke
Tel.: +49 201 / 36014-16 Dr.-Ing. W. Hagemeister
Fax.: +49 201 / 36014-14 Tel.: +49 201 / 360-14-0
richard.hacker at igh-essen.com http://www.igh-essen.com
------------------------------------------------------------------------
More information about the Etherlab-users
mailing list