[etherlab-users] SimMechanics

[Florian Pose]

Hello Jasper,

On Thu, May 06, 2010 at 09:59:22AM +0200, Westpfahl Jasper wrote:
> We have some problems with integrating simmechanics-blocks into simulink
> environment and using the generated module. We have no idea how to start
> getting rid of this problem.
> 
> We have following error message after
> 
> >insmod smt_kmod.ko
> 
> insmod: error inserting 'smt_kmod.ko': -1 Unknown symbol in module
> 
> The unknown symbols are all listed in the Matlab output and in
> /var/log/messages and appear with dmesg but we don't know what to do
> with the error message.
> 
> Maybe this is not a specific simmechanics-problem so we hope somebody
> can help us. The output from /var/log/messages, the whole model tree
> (smt.tar.gz) and the output from matlab after building process are
> downloadable from http://drop.io/jasperw .

Are you sure, that the SimMechanics package is supported in the
Real-Time-Workshop? The missing library functions should otherwise
automatically be linked in when RTW generates the target Makefile.

-- 
Best regards,
Florian Pose

http://etherlab.org