[etherlab-users] Make error while installing the data logging service(dls)

[Richard Hacker]

Hi Jayson,

OK, the version you have is quite old. I will try to post a new version on the 
homepage. Meanwhile you can try adding
#include <cstring>
to com_file.cpp. Hope that does the trick.

- Richard

On Monday 29 November 2010 19:12:48 Jayson Ding wrote:
> Hello Richard
> Thank you for the quick reply. I tried to add #include <cstdio>  in
> com_time.cpp file.
> It generates more errors as following:
> Any hint about how to fix it. Thank you!
> Jayson
> 
> make[2]: Entering directory `/usr/local/src/dls-1.1-r160/src'
> g++ -DHAVE_CONFIG_H -I. -I..  -I/usr/include -I/usr/include   -g -O2 -MT
> libcomdls_a-com_time.o -MD -MP -MF .deps/libcomdls_a-com_time.Tpo -c -o
> libcomdls_a-com_time.o `test -f 'com_time.cpp' || echo './'`com_time.cpp
> mv -f .deps/libcomdls_a-com_time.Tpo .deps/libcomdls_a-com_time.Po
> g++ -DHAVE_CONFIG_H -I. -I..  -I/usr/include -I/usr/include   -g -O2 -MT
> libcomdls_a-com_file.o -MD -MP -MF .deps/libcomdls_a-com_file.Tpo -c -o
> libcomdls_a-com_file.o `test -f 'com_file.cpp' || echo './'`com_file.cpp
> com_file.cpp: In member function ‘void COMFile::open_read(const char*)’:
> com_file.cpp:72: error: ‘strerror’ was not declared in this scope
> com_file.cpp: In member function ‘void COMFile::open_read_write(const
> char*)’:
> com_file.cpp:110: error: ‘strerror’ was not declared in this scope
> com_file.cpp:117: error: ‘strerror’ was not declared in this scope
> com_file.cpp:128: error: ‘strerror’ was not declared in this scope
> com_file.cpp: In member function ‘void COMFile::open_read_append(const
> char*)’:
> com_file.cpp:168: error: ‘strerror’ was not declared in this scope
> com_file.cpp:175: error: ‘strerror’ was not declared in this scope
> com_file.cpp:186: error: ‘strerror’ was not declared in this scope
> com_file.cpp: In member function ‘void COMFile::close()’:
> com_file.cpp:212: error: ‘strerror’ was not declared in this scope
> com_file.cpp:226: error: ‘strerror’ was not declared in this scope
> com_file.cpp: In member function ‘void COMFile::write(const char*,
> unsigned int)’:
> com_file.cpp:293: error: ‘strerror’ was not declared in this scope
> com_file.cpp:298: error: ‘strerror’ was not declared in this scope
> com_file.cpp: In member function ‘void COMFile::append(const char*,
> unsigned int)’:
> com_file.cpp:373: error: ‘strerror’ was not declared in this scope
> com_file.cpp:378: error: ‘strerror’ was not declared in this scope
> com_file.cpp: In member function ‘void COMFile::seek(unsigned int)’:
> com_file.cpp:423: error: ‘strerror’ was not declared in this scope
> com_file.cpp: In member function ‘void COMFile::read(char*, unsigned
> int, unsigned int*)’:
> com_file.cpp:460: error: ‘strerror’ was not declared in this scope
> com_file.cpp: In member function ‘long long int COMFile::calc_size()’:
> com_file.cpp:492: error: ‘strerror’ was not declared in this scope
> make[2]: *** [libcomdls_a-com_file.o] Error 1
> make[2]: Leaving directory `/usr/local/src/dls-1.1-r160/src'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/usr/local/src/dls-1.1-r160'
> make: *** [all] Error 2
> 
> > Hello
> >
> > gcc is getting stricter all the time...
> >
> > I have not tried it out myself, but adding
> > #include<cstdio>
> > in the top section of com_time.cpp should help
> >
> > - Richard
> >
> > On Monday 29 November 2010 00:38:37 Jayson Ding wrote:
> >> Dear all
> >> I tried to install Data logging service on my ubuntu. But I was stuck in
> >> the following make error.
> >> Can anyone help me out? thank you.
> >>
> >> make  all-recursive
> >> make[1]: Entering directory `/usr/local/src/dls-1.1-r160'
> >> Making all in src
> >> make[2]: Entering directory `/usr/local/src/dls-1.1-r160/src'
> >> g++ -DHAVE_CONFIG_H -I. -I..  -I/usr/include -I/usr/include   -g -O2 -MT
> >> libcomdls_a-com_time.o -MD -MP -MF .deps/libcomdls_a-com_time.Tpo -c -o
> >> libcomdls_a-com_time.o `test -f 'com_time.cpp' || echo './'`com_time.cpp
> >> com_time.cpp: In member function ‘std::string COMTime::to_real_time()
> >> const’:
> >> *com_time.cpp:416: error: ‘sprintf’ was not declared in this scope*
> >> make[2]: *** [libcomdls_a-com_time.o] Error 1
> >> make[2]: Leaving directory `/usr/local/src/dls-1.1-r160/src'
> >> make[1]: *** [all-recursive] Error 1
> >> make[1]: Leaving directory `/usr/local/src/dls-1.1-r160'
> >> make: *** [all] Error 2
> >>
> >> While configuring DLS, I installed fltk, FFTW3 ,and bunch of relevant
> >> libs in order to pass the configuration.
> >> My system environment is:
> >>
> >> linux: 2.6.32.11
> >> rtai:3.8.1
> >> etherlab: 1.3-pre
> >> matlab: 7.4.0.336
> >> realtime workshop: 6.6
> >>
> >> In addition, both data logging service package's software and doc are in
> >> German.
> >> Does anyone have me some english support?
> >>
> >> Jayson
> 

-- 
------------------------------------------------------------------------

Richard Hacker                               Amtsgericht Essen HRB 11500  
Ingenieurgemeinschaft IgH                    USt-Id.-Nr.: DE 174 626 722 
Ges. für Ingenieurleistungen mbH             Geschäftsführung:           
Heinz-Baecker-Str. 34                        Dr.-Ing. S. Rotthäuser      
D-45356 Essen                                Dr.-Ing. T. Finke           
Tel.: +49 201 / 36014-16                     Dr.-Ing. W. Hagemeister     
Fax.: +49 201 / 36014-14                     Tel.: +49 201 / 360-14-0    
richard.hacker at igh-essen.com                 http://www.igh-essen.com    

------------------------------------------------------------------------