[etherlab-users] How to set tcp Port for etherlab_buddy

[Andreas Stewering-Bone]

Hello Beat,

nice to hear that you want to help with EtherCOS.

Actually the 0.0.2 branch is frozen but is possible to bug fix.
If you want to help i can grant you access to the reposity.

For actual development:
    - I am rewriting Ethercos completely, because of some changes in 
concepts.
    - I am porting to Scilab 5.x but compatibility to Scicoslab is 
possible but it is further work

Actually I am very busy at work, so devellopment stands still.


Greatings

Andreas


Beat Gerber schrieb:
> Beat Gerber <beat.gerber at ...> writes:
>
>   
>> Richard Hacker <ha at ...> writes:
>>
>>     
>>> Hi,
>>>
>>> It seems as though you do not have any real time application running. 
>>> etherlab_buddy opens one port starting from 2345 for every running real time 
>>> application. rt_appcore is only the framework to allow these applications to 
>>> run in real time.
>>>
>>> Richard
>>>       
>> Hi Richard,
>>
>> OK .. this was not clear to me. I thought as I can access the modules directly
>> over TCP .. and if I need to also put a realtime module in between.
>> So now I have to create a realtime gateway.
>> I'll try to install ethercos with no success  is there a newer Version around?
>> ScicosLab-4.4b7 is installed (Fedora 13) 
>>
>> ethercos-0.0.2-rc15]$ make
>> echo "execute builder.sce in scilab"
>> execute builder.sce in scilab
>> scilab -nw -nb -f builder.sce;
>>
>>     
>>
>>  Scilab Version not supported   
>>
>>  warning: stack problem..., cleared
>>
>> -->
>>
>> Should this work? Or is there a known problem?
>>
>> Beat
>>
>>
>>     
>
> I see ... I only have to read the right documentation ..
>
> ******
>   The requirements for installing EtherCos from source code are the following:
>
>     a - Scilab.
>
>       The new version of EtherCos only runs with Scilab 4.1.2 and
> Scilab_GTK-4.1.2 and Scicoslab-4.3.
>       Your Scilab can be both a stable version (source, binary file).
>       Get it from www.scilab.org
>
>     b - Operating System
>       
>       EtherCos has to be executed under Linux (until now only X86 is supported).
>       A running Kernel with HRT-Timer activated and the Preempt-RT patch
> included is neccessary.
> ******
>
> I would like to help .. if I can .. to get EtherCos working with ScicosLab-4.4b7
> on Fedora 13 x86_64
>
> Beat
>
>
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>   


-- 

------------------------------------------------------------------------

Dipl.-Ing. Andreas Stewering-Bone            Amtsgericht Essen HRB 11500 
Ingenieurgemeinschaft IgH                    USt-Id.-Nr.: DE 174 626 722 
Gesellschaft für Ingenieurleistungen mbH     Geschäftsführung:           
Heinz-Bäcker-Str. 34                         Dr.-Ing. S. Rotthäuser      
D-45356 Essen                                Dr.-Ing. T. Finke           
Tel.: +49 201 / 360-14-15                    Dr.-Ing. W. Hagemeister     
Fax.: +49 201 / 360-14-14                    Tel.: +49 201 / 360-14-0    
Andreas.Stewering-Bone at igh-essen.com         http://www.igh-essen.com    

------------------------------------------------------------------------