[etherlab-users] Problem with module installation

[Richard Hacker]

Hello

Please supply some information about your operating system.

Also, supply the symbol table for all generated objects:
# cd <modelname>_etl_rtw
# nm *.o

Richard

On Tuesday 26 October 2010 08:49:00 joergs at feinripptraeger.de wrote:
> Hello,
> 
> this is my previous mail in english with some additional information:
> I've downloaded the ethernet-bundle-1.6 from www.etherlab.org and installed
>  it. So now I'm running kernel 2.6.24.7, rtai 3.6.2, ethercat 1.4 and
>  etherlab 1.2rc4 (i've also tried etherlab 1.2rc10). I've started the new
>  kernel and the services ethercat and etherlab. Now I built a simple
>  Simulink Model containing EK1100, EL3102 and EL4102. There is a gain of
>  0.5 between EL3102 and EL4102. After having adjusted the Configuration
>  Parameters I built the model and received several warnings of undefined
>  symbols (like __snprintf_chk). Now I tried to execute insmod. There was an
>  error (dmesg) saying that the symbol __snprintf_chk is undefined. I don't
>  know which library is missing. I didn't find this error in Internet. Could
>  you give me some advise please?
> 
> Thank you
> 
> Joerg
> 

-- 
------------------------------------------------------------------------

Richard Hacker                               Amtsgericht Essen HRB 11500  
Ingenieurgemeinschaft IgH                    USt-Id.-Nr.: DE 174 626 722 
Ges. für Ingenieurleistungen mbH             Geschäftsführung:           
Heinz-Baecker-Str. 34                        Dr.-Ing. S. Rotthäuser      
D-45356 Essen                                Dr.-Ing. T. Finke           
Tel.: +49 201 / 36014-16                     Dr.-Ing. W. Hagemeister     
Fax.: +49 201 / 36014-14                     Tel.: +49 201 / 360-14-0    
richard.hacker at igh-essen.com                 http://www.igh-essen.com    

------------------------------------------------------------------------