[etherlab-users] ./configure not succeeding

[Malcolm]

On Fri, 15 Jul 2011 09:06:43 -0500
"Jeff Krasky" <jeff.krasky at dspcg.com> wrote:

> Ok, thanks.  I got the 2.1 rpm and this is the end of the rpmbuild
> command:

===> + exit 0

> That looks correct, no?  Then I logged in as root and did this:

Yes, building is good :)

> So now where am I at?  Do I have an ethercat executable somewhere?
> Also, the source code I was working with is what made, or will make,
> the executable that I will get from using your RPMs right?

You need to install ethercat-1.5.4adb56c4198d-2.1.i586.rpm and
libethercat1-1.5.4adb56c4198d-2.1.i586.rpm.

If you want the development headers then
ethercat-devel-1.5.4adb56c4198d-2.1.i586.rpm

You will then have the ethercat executable (/usr/bin/ethercat) and also
the ethercat service which can be enabled via YaST runlevels, there is
also a sysconfig entry which can be modified via YaST /etc/sysconfig
editor.

-- 
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 11.4 (x86_64) Kernel 2.6.37.6-0.5-desktop
up 5 days 8:10, 3 users, load average: 0.05, 0.13, 0.14
GPU GeForce 8600 GTS Silent - Driver Version: 270.41.19