[etherlab-users] ./configure not succeeding

[Malcolm]

On Wed, 13 Jul 2011 14:26:11 -0500
"Jeff Krasky" <jeff.krasky at dspcg.com> wrote:

> > cat /etc/SuSE-release
> 
> SUSE LINUX 10.1 (i586)
> VERSIOJN = 10.1
> 
> > Yes, open YaST -> software management then search for kernel, select
> > the above items. I think it should tell you which CD to install.
> 
> kernel-source and kernel-syms were already checked and
> linux-kernel-headers didn't appear in the list.  So I guess to stay
> on track, 
> 
> 1. Did my ./configure command finish properly?  (config.status:
> executing depfiles commands)
> 
> 2. How to get past this make error: In file included from
> /root/Desktop/etherlabmaster-4adb56c4198d/master/master.h:48,
>                  from
> /root/Desktop/etherlabmaster-4adb56c4198d/master/cdev.c:42:
> /root/Desktop/etherlabmaster-4adb56c4198d/master/ethernet.h:42:29:
> error: linux/semaphore.h: No such file or directory
> 
> 
> Thanks again,
> 
> 
> 
> Jeff
> 
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
Hi
Well semaphore.h is in /usr/include on the 2.6.16.46 (SLE 10) I'm
using...

I run;
configure --enable-tty \
              --enable-static=no \
              --disable-8139too \
              --disable-generic \
              --with-linux-dir=/usr/src/linux-2.6.16.46-0.12-obj/x86_64/default

make

Then build the modules.

-- 
Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 11.4 (x86_64) Kernel 2.6.37.6-0.5-desktop
up 3 days 13:33, 3 users, load average: 0.23, 0.18, 0.17
GPU GeForce 8600 GTS Silent - Driver Version: 270.41.19