[etherlab-users] install on non-PC

babbittner at aol.com babbittner at aol.com
Tue Nov 22 17:43:54 CET 2011

/opt is the default install location.  At this point you need to do the configuration steps for the ethercat master.

Did you do the 'make install as root' with ARCH=arm CROSS_COMPILE=... or without? 




-----Original Message-----
From: Jeff Krasky <jeff.krasky at dspcg.com>
To: etherlab-users <etherlab-users at etherlab.org>; 'Bruno Bittner' <babbittner at aol.com>
Sent: Tue, Nov 22, 2011 9:00 am
Subject: RE: [etherlab-users] install on non-PC

Getting closer…
> # I may have run make install as root here?

I ran ‘make install’ as rooton the Linux PC and then I went into BuildRoot and did ‘make’.  WhenI checked, only the filesystem was rebuilt.  Now when I put the rebuiltfilesystem on the board, I see this:
# pwd
# find . -iname '*ethercat*'
# opt/etc/init.d/ethercat start
/etc/sysconfig/ethercat not existing
So certainly EtherCAT is now being builtin.  Why are things in the “opt” directory though?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20111122/d05baca9/attachment-0004.htm>

More information about the Etherlab-users mailing list