[etherlab-users] Using Beckhoff CX50x0 embedded PCs with EtherLab

[Andreas Stewering-Bone]

Hello Jari

It is a nice plattform but the NIC Interface is a FPGA.
Beckhoff has not documented this interface for externals. So there is no 
chance to write a driver.
Mybe you can ask Beckhoff for the specification, we have done it 
already, but we get the answer that it has low priority. Maybe we can 
change this by request this specification from different sides.

Best regards

Andreas


Am 22.09.2011 16:19, schrieb Jari Lietzen:
> Hi!
>
> Has anyone used Beckhoff CX5010 or CX5020 embedded PCs with Etherlab? 
> These are embedded PCs with direct E-bus interface for EtherCAT 
> slaves. Any experience or comment is highly appreciated.
>
> Best regards,
>
> -Jari Lietzen
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users


Mit freundlichem Gruß

Andreas Stewering-Bone

-- 
------------------------------------------------------------------------

Dipl.-Ing.(FH) Andreas Stewering-Bone
andreas.stewering-bone at igh-essen.com
Tel.: +49 201 / 36014-15

Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Heinz-Bäcker-Str. 34
D-45356 Essen
Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschäftsführung:
- Dr.-Ing. S. Rotthäuser,
- Dr.-Ing. T. Finke,
- Dr.-Ing. W. Hagemeister
Tel.: +49 201 / 360-14-0
http://www.igh-essen.com

------------------------------------------------------------------------