[etherlab-users] missing EtherCAT0 device node uder /dev directory

[Zhe Zhang]

I am transplanting EtherCAT onto Atmel evaluation board with ARM processor
on that. As you mentioned in EtherCAT tutorial. *KERNEL=="EtherCAT[0-9]*",
MODE="0664" *this line in the file of */etc/udev/rules.d/99-EtherCAT.rules *can
generate EtherCAT0 device node under */dev. *I did this on my PC and it
works fine. But when I use buildroot cross-compile tool to build the kernel
image and download to the board. It does not generate EtherCAT0 at all.
Could you give any suggestions?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20120130/64222565/attachment-0003.htm>