[etherlab-users] C++ Applications

[Mike O'Connor]

Hi John

Our project has a few objectives.
1. A program which will scan the bus and configure all the IO ready for
the code below.
2. An emulator for a old program language which was used on a Z80
control board.
3. Implement a language bases on state/event principle for current and
future projects.
4. Implement a interface for compiled modules to be loaded easily.

After the first release we will probably implement a kernel module to
driving the IO as fast as possible.

I really need my question I sent in the last week answered but as this
time no one has responded. :(

Mike

On 3/03/12 11:52 PM, John Erlandsson wrote:
> Awsome!
>
> Would you mind giving me a short description of the project?
>
> //John
>
> On 2012-03-03 03:50, Mike O'Connor wrote:
>> Hi John
>>
>> Not as yet, hope fully with in 4 to 6 weeks it will be on github
>>
>> Mike
>>
>>
>>
>>
>>
>> On 03/03/2012, at 1:27 AM, John Erlandsson <john at lunatech.se
>> <mailto:john at lunatech.se>> wrote:
>>
>>> Hi Mike!
>>>
>>> How cool that you are producing a tool kit. Can i read about its
>>> progress somewhere?
>>>
>>> //John
>>>
>>> On 2012-03-02 03:55, Mike O'Connor wrote:
>>>> Hi john
>>>>
>>>> My reason for posting my questions in the last few days is for
>>>> exactly this reason. Once finished we will be publishing a tool kit
>>>> under a open source license
>>>>
>>>> Mike
>>>>
>>>>
>>>> On 02/03/2012, at 12:43 PM, John Erlandsson <john at lunatech.se
>>>> <mailto:john at lunatech.se>> wrote:
>>>>
>>>>> Hi!
>>>>>
>>>>>
>>>>> I am curious as to know if there is a way of using your EtherCat
>>>>> master for automation purposes, without Simulink.
>>>>>
>>>>>
>>>>> What I basically want to do is: Describe the bus in a
>>>>> configuration file, and assign names to the I/O.
>>>>>
>>>>> I then want them to be imported and declared somehow in a C++
>>>>> application.
>>>>>
>>>>>
>>>>> Like TwinCat, but with C++ and Linux...
>>>>>
>>>>>
>>>>> The reason for this is that I think it would be awesome to do
>>>>> industrial automation in C++. To actually abstract machines and
>>>>> subclass them, instead of reusing code snippets.
>>>>>
>>>>>
>>>>>
>>>>> Could someone give me a dumb-ed down version of how this could be
>>>>> done?
>>>>>
>>>>>
>>>>> Does anyone have a better idea of using the master?
>>>>>
>>>>>
>>>>> Is it even a good idea to use userspace applications?
>>>>>
>>>>>
>>>>>
>>>>> Appreciate any help.
>>>>>
>>>>>
>>>>> //John
>>>>>
>>>>> _______________________________________________
>>>>> etherlab-users mailing list
>>>>> etherlab-users at etherlab.org <mailto:etherlab-users at etherlab.org>
>>>>> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>>>
>>> _______________________________________________
>>> etherlab-users mailing list
>>> etherlab-users at etherlab.org <mailto:etherlab-users at etherlab.org>
>>> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users