[etherlab-users] Is Ethercat Master Enough to Control Servo

[Raz Ben Yehuda]

On Sun, 2012-09-02 at 11:47 +0200, takeshi ikeya wrote:
> Hi Tahir!
> I think ENOUGH..
> If you need quick response, you'd beter use it under RTAI (Linux).
> 
I must add that did not find the current design suitable for moving
servo drives. For this reason I modified etherlab to support slave DC
bus time ( currently etherlab is App time based).

> 
>   takeshi.ikeya at gmail.com

-- 
https://sites.google.com/site/ironspeedlinux/