[etherlab-users] tty example not working
Matthieu Bec
mbec at gmto.org
Mon Sep 3 04:56:48 CEST 2012
Can you send a dmesg output? I only briefly experimented with the tty
demo - it worked for me, right out of the box.
On 09/02/12 06:55, Parthasarathy S wrote:
> Hello Matthieu,
>
> EL6002 is present in the bus.
> `ethercat slaves` shows that EL6002 is present.
>
> Regards
>
> Partha
>
> On Sat, Sep 1, 2012 at 7:03 PM, Matthieu Bec <mbec at gmto.org
> <mailto:mbec at gmto.org>> wrote:
>
>
> Hello Parthasarathy,
>
> do you have an EL6002 present in your bus? the demo scans all the
> slaves and only create /dev/tty's when it finds suitable devices.
>
>
> > I assume it should be
> > `/etc/init.d/ethercat start`
>
> yes, typo in the readme
>
> Matthieu
>
>
>
> On 08/31/12 18:31, Parthasarathy S wrote:
>
> Hello,
>
> I am trying out the tty example. I've enabled it with
> --enable-tty option.
> One of the steps in the tty/README file is to run the command
> `rcethercat start`
> There is no such command. I assume it should be
> `/etc/init.d/ethercat start`
>
> There is no error in other steps.
>
> I notice that /dev/ttyEC0 is not created.
>
> Can someone help.
>
> Thanks and best regards
>
>
> --
> Parthasarathy S
> C612 Sena Vihar
> Kammanahalli Main Road
> Bangalore 560043 India
>
>
>
> _________________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org <mailto:etherlab-users at etherlab.org>
> http://lists.etherlab.org/__mailman/listinfo/etherlab-__users
> <http://lists.etherlab.org/mailman/listinfo/etherlab-users>
>
>
>
> --
> Matthieu Bec GMTO Corp.
> cell: +1 626 354 9367 P.O. Box 90933
> phone: +1 626 204 0527 Pasadena, CA 91109-0933
>
>
>
>
> --
> Parthasarathy S
> C612 Sena Vihar
> Kammanahalli Main Road
> Bangalore 560043 India
>
--
Matthieu Bec GMTO Corp.
cell: +1 626 354 9367 P.O. Box 90933
phone: +1 626 204 0527 Pasadena, CA 91109-0933
More information about the Etherlab-users
mailing list