[etherlab-users] Fedora Install

[Dusty Clark]

Here is a somewhat out of date document on how we did it. We currently use
the master under Fedora 17/18 without problems. Briefly, you will need the
'Development Tools' group, the kernel-devel package, and kernel-headers
package, plus a few others mentioned in the document. Clone the etherlab
repository and follow their instructions on configure and so forth.

We use the generic interface on an ancient Shuttle box's motherboard
ethernet interface and it works up till about 15kHz data rates.

Good luck!


On Fri, Apr 26, 2013 at 8:05 AM, Giovanni Lazzarini
<glazzarini at esyste.com>wrote:

>  Hi,
> I would like to install the ehrtlab system in my Fedora 17 ( or 18)...(kernel
> is 3.6.10-4)
> Is it possible?
> Where can I find some DOC how to install and folllow install peocedure
> step by step?
>
> Sincerely
> Joe
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20130426/75e89d8d/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: MMT Ethercat User Guide.pdf
Type: application/pdf
Size: 409557 bytes
Desc: not available
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20130426/75e89d8d/attachment-0005.pdf>