[etherlab-users] Graphical Interface for Rapid Integration

[Thomas Bitsky, Jr.]

Raz,

My staff and I would be interested. We use Qt extensively, and have
started looking to Etherlab for some projects. Email me if you'd like
to discuss it.

Thanks!
Thomas C. Bitsky Jr. |  Lead Developer
ADC | automateddesign.com
P: 630.783.1150  F: 630.783.1159

(Sent from my mobile device.)

On Feb 16, 2013, at 7:45 AM, "Ben Yehuda, Raz" <RBenYehuda at manz.com> wrote:

> Hey Deigo
>
> I am working on a QT based GUI that generates code from etherlab XML output.
> if you wish to join hands i would appreciate .
>
> ________________________________________
> From: BOESEL Diego Fernandes [Diego.BOESEL at csem.ch]
> Sent: Friday, February 15, 2013 9:29 AM
> To: etherlab-users at etherlab.org
> Subject: [etherlab-users] Graphical Interface for Rapid Integration
>
> Hello,
>
> I would like to know if there is any graphical interface for the Etherlab Master. I was expecting something like a tool that shows graphically what is attached in the bus, and where I can send commands/set bits/... graphically, for the purpose of rapid integration of the hardware.
>
> Thank you in advance,
>
> ------------------------------------------------------------------------
> Diego F. Boesel, M.Sc. (Technology)
> R&D Engineer
> diego.boesel at csem.ch<mailto:diego.boesel at csem.ch>
> T    +41 41 672 75 12
> F    +41 41 672 75 00
> ------------------------------------------------------------------------
> CSEM Centre Suisse d'Electronique et de Microtechnique SA
> Central Switzerland Center
> Untere Gründlistr. 1  |   CH-6055 Alpnach Dorf
> www.csem.ch<http://www.csem.ch/>
> ------------------------------------------------------------------------
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users