[etherlab-users] Open source virtual Linux Ethercat Slave

[Raz]

hey bruno
once done please send me the patches. please have them split by what they
do and not how you
made the commits.
thank you

On Tue, Jan 15, 2013 at 4:51 PM, <babbittner at aol.com> wrote:

> I went a different route since I couldn't figure out if the TUN/TAP
> feature could support the need.
>
> I hacked the code to make an array of slaves.  I've done up to 500
> simulated slaves so far.  This is on a single IBM ThinkPad T43 (Centrino)
> running Ubuntu 10.04.4LTS.
>
> There is a problem with topology detection because the downstream link
> appears on port 3, but I only enable ports 0 and 1.  This doesn't seem to
> affect the linear topology I'm interested in.
>
> There is also a problem with LRW command, with the size of the packet
> and/or the number of slaves so the packet size is wrong and an incorrect
> area in the packet is written.
>
hamm.. ok. I'l tell  a look once you have the patch ready

I also changed the code to use the bin file of my particular slave of
> interest.  This is not quite complete or generic at this time.
>
> All the above is sufficient for my internal testing needs.  I would be
> willing to hand this code off after some cleaning with the understanding
> there would be de-hack-ification and debugging provided by others and
> re-released.  I've also not been doing git updates, so the code may be
> weeks out of date.
>
> Thanks for your understanding,
> Bruno
>
>
>
>  -----Original Message-----
> From: Shahbaz Youssefi <shabbyx at gmail.com>
> To: rbenyehuda <rbenyehuda at manz.com>
> Cc: babbittner <babbittner at aol.com>; etherlab-users <
> etherlab-users at etherlab.org>
> Sent: Tue, Jan 15, 2013 4:05 am
> Subject: Re: [etherlab-users] Open source virtual Linux Ethercat Slave
>
>   Hi Raz,
>
>  Is it possible with your software to fake networks with large number of
> slaves? The way I understand, you should have `ethX` interfaces for your
> slaves to hook on to. Perhaps you could try babbittner at aol.com's idea of
> named pipes and if any of the given parameters (to the user-space one)
> couldn't be opened, you automatically hook on to a named pipe to transfer
> the data?
>
>  This would be very useful to test software targeted to work with large
> number of slaves, without actually having to buy that many slaves (or
> network cards!)
>
> Shahbaz
>
>
> On Mon, Nov 26, 2012 at 8:39 AM, Raz Ben Yehuda <rbenyehuda at manz.com>wrote:
>
>> On Mon, 2012-11-26 at 02:35 +0100, babbittner at aol.com wrote:
>> > I'm attempting to run multiple virtual slaves on one host.  I setup a
>> > TUN/TAP interface via tunctl named tap0.  Then I issued the commands:
>> > ./ecslave tap0 &
>> > ./ecslave eth0 tap0 &
>> > but I get a message the tap0 interface is LINK DOWN.
>> > Possibly I'm misusing the TUN/TAP virtual interfaces?
>>  user space ecslave checks that /sys/class/net/ethX/operstate is "up".
>> Do you have this path for tap0 ?
>>
>> > Alternatively I'd like to use something like named pipes, but I
>> > believe that would involve modifying the code.  If I were to modify
>> > the code
>>  This is what open source is all about. i will be happy to adopt your
>> code.
>>  >   I think I'd add an option to specify the number of slaves to
>> > virtualize and make an array of slaves internally.
>> >
>> > Any other ideas?
>> >
>> > Thanks,
>> > Bruno
>>
>>
>>
>>
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: Ben Yehuda, Raz <RBenYehuda at manz.com>
>> > To: etherlab-users <etherlab-users at etherlab.org>
>> > Sent: Wed, Nov 21, 2012 2:25 pm
>> > Subject: [etherlab-users] Open source virtual Linux Ethercat Slave
>> >
>> > Hello etherlab users
>> >
>> > I wrote an open source linux virtual ethercat slave.
>> >
>> > $ git clone git://git.code.sf.net/p/ecslave/code ecslave
>> >
>> > Ecslave is "tailored" to etherlab and it provides a virtual
>> > and cheap solution to set up and debug etherlab master application.
>> >
>> > At the moment ec_slave is user space application, but i am going to add
>> a
>> > version to kernel mode in the near future.
>> >
>> > wiki :
>> > https://sourceforge.net/p/ecslave/wiki/Howto/
>> >
>> > I will be happy for debug and input.
>> >
>> > raz
>> >
>> > _______________________________________________
>> > etherlab-users mailing list
>> > etherlab-users at etherlab.org
>> > http://lists.etherlab.org/mailman/listinfo/etherlab-users
>>
>>  --
>> https://sites.google.com/site/ironspeedlinux/
>>
>> _______________________________________________
>> etherlab-users mailing list
>> etherlab-users at etherlab.org
>> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>>
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>
>


-- 
https://sites.google.com/site/ironspeedlinux/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20130117/bb2f6103/attachment-0004.htm>