[etherlab-users] WG: r8169 driver for 2.6.38 kernel

R.Kelbley rkelbs at gmail.com
Sun Mar 31 21:56:40 CEST 2013


Hi Olaf,

Would you mind sharing your .config or any other insight you have to
getting RTAI 3.9 running on 2.6.35.9 with Ubuntu 12.04?  I have it
running on 2.6.32.20 but am also seeing the mismatches and timeouts.
Unfortunately, when I try to use 2.6.35.9 RTAI locks up the computer
when trying to run latency tests or other RTAI application.

Best regards,
Robby

On Thu, Feb 28, 2013 at 2:23 AM, Olaf Holowenko
<holowenko at iwm.mw.tu-dresden.de> wrote:
> Hi,
>
>
>
> while trying the 2.6.37-r8169-driver (Master V 1.5.1, Ubuntu 12.04, RTAI
> 3.9) I also got a lot of timeouts, mismatches, and errors. I downgraded my
> system to 2.6.35 – and it works fine!
>
>
>
> Just try to port the 2.6.35-driver!
>
>
>
> Olaf
>
>
>
> ________________________________
>
> Von: etherlab-users-bounces at etherlab.org
> [mailto:etherlab-users-bounces at etherlab.org] Im Auftrag von Shahbaz Youssefi
> Gesendet: Mittwoch, 27. Februar 2013 15:27
> An: etherlab-users
> Betreff: [etherlab-users] r8169 driver for 2.6.38 kernel
>
>
>
> Hi,
>
> I would like to ask whether anyone has the patch for r8169 driver for the
> 2.6.38 kernel? In the repository, up to 2.6.37 is supported and then jumped
> to 3.0.
>
> 2.6.38 is, until RTAI catches up with 3.*, the latest kernel supported by
> RTAI and it would be nice if we had ethercat drivers for it too.
>
> I tried applying the diff between the orig and ethercat versions of the
> driver for 2.6.37, on the driver of 2.6.38 and fixed the conflicts, which
> were rather trivial. However, starting the ethercat master results in many
> timeouts, mismatches, errors and failures of all sorts, which leads me to
> believe that simply applying the diff to the newer driver hadn't been
> enough.
>
> Even if not officially supported, perhaps someone here has already fixed the
> driver for his own use. In that case, would you please share it? If not,
> would the developers take (possibly small) time to come up with the driver?
>
> Thank you,
> Shahbaz
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>



More information about the Etherlab-users mailing list