[etherlab-users] Questions about Igh 1.4.0 master
Richard Hacker
ha at igh.de
Tue Nov 12 12:04:34 CET 2013
copy /opt/etherlab/etc/sysconfig/ethercat to /etc/sysconfig/ethercat and
then edit it with the correct values. Now restart ethercat.
is the module ec_8139too loaded? (lsmod)
Am 11/12/2013 11:56 AM, schrieb 林郁寧:
> Hi, we are students working on EtherCAT master project via Igh open
> source code, and we have some trouble doing the project, we use Igh
> 1.4.0 version,
>
> When I ./ethercat, I could get EtherCAT master 1.4.0 done message,
>
> and then I revised /opt/etherlab/etc/sysconfig/ethercat, I changed
> MASTER0_DEVICE="ff:ff:ff:ff:ff:ff:ff", and DEVICE_MODULES="8139too".
>
> After that I ran /opt/etherlab/bin/ethercat master, but I got message below:
>
> Master0
> Phase: Waiting for device...
> Slaves: 0
> Device0: ff:ff:ff:ff:ff:ff (waiting...)
> Tx count: 0
> Rx count: 0
> Device1: None.
>
> I found some solutions and changed ff:ff:ff:ff:ff:ff to MAC address, but
> message still same, what should I checked next or what I did wrong?
> Should I connect slave(s) then I can get the correct message?
>
> By the way, I also tried method on
> (http://lists.etherlab.org/pipermail/etherlab-users/2011/001341.html
> and got 8139too card.
> <http://lists.etherlab.org/pipermail/etherlab-users/2011/001341.html>--
>
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>
Mit freundlichem Gruß
Richard Hacker
--
------------------------------------------------------------------------
Richard Hacker M.Sc.
richard.hacker at igh-essen.com
Tel.: +49 201 / 36014-16
Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Heinz-Bäcker-Str. 34
D-45356 Essen
Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschäftsführung:
- Dr.-Ing. T. Finke,
- Dr.-Ing. W. Hagemeister
Tel.: +49 201 / 360-14-0
http://www.igh-essen.com
------------------------------------------------------------------------
More information about the Etherlab-users
mailing list