[etherlab-users] Run error with Simulink created executable file

[Ralph Oosterveld]

hello,

I can make and compile my own model with EtherLab and Simulink. But when I
run the created executable file I get the following error:

> ctw-arms at ctw-arms-pc ~/Matlab/Documents/Simulink $ sudo ethercat slaves
> 0  0:0  PREOP  +  EK1100 EtherCAT-Koppler (2A E-Bus)
> 1  0:1  PREOP  +  EL2008 8K. Dig. Ausgang 24V, 0.5A
> 2  0:2  PREOP  +  EL1819 16K. Dig. Eingang 24V, 10�s

> ctw-arms at ctw-arms-pc ~/Matlab/Documents/Simulink $ ./test_3_4
> mlockall() failed: Cannot allocate memory
> Setting SCHED_FIFO with priority 99 failed: Operation not permitted
> Failed to create slave config: No such file or directory
> Fatal error: Starting EtherCAT subsystem failed:
ecrt_master_slave_config() failed while configuring slave 0:1
> [1]ctw-arms at ctw-arms-pc ~/Matlab/Documents/Simulink $ sudo ./test_3_4
> Failed to create slave config: No such file or directory
> Fatal error: Starting EtherCAT subsystem failed:
ecrt_master_slave_config() failed while configuring slave 0:1


I hope someone can help to solve it.

Thank you in advance,
*Ralph Oosterveld*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20140404/70b289b1/attachment-0002.htm>