[etherlab-users] Parameters list disappears in Testmanager

[Simone Denei]

Thanks, problem solved!

Simone.

Il 10/01/2014 13:36, Richard Hacker ha scritto:
> Which version of EtherLab are you using? Do you have to load a kernel
> module and require etherlab_buddy?
>
> If so, start etherlab_buddy with a larger buffer, e.g.
> etherlab_buddy -b 10000000
>
> - Richard
>
> Am 01/10/2014 09:46 AM, schrieb Simone Denei:
>> Hello Everybody,
>>
>> I'm a researcher at the University of Genova and I'm working on a test
>> platform for our experiments. The platform has the same structure of a
>> CNC machine plus a number of sensors that record the experiment. I'm
>> developing the control process using Simulink and I'm controlling the
>> platform using an interface developed in Testmanager. Until yesterday
>> everything works fine. As soon as I add to the Simulink model another
>> slave, I cannot see the parameters list in Testmanager anymore and I
>> cannot control the platform. This also happens if I add to the Simulink
>> model a big signal (let's say a signal of 100 elements). I think I've
>> overreached the maximum number of parameters that can be effectively
>> controlled by Testmanager (the simulink model is quite complex).
>> Is there any solution to this problem?
>>
>> Thanks in advance.
>>
>> Simone Denei.
>> _______________________________________________
>> etherlab-users mailing list
>> etherlab-users at etherlab.org
>> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>>
>
> Mit freundlichem Gruß
>
> Richard Hacker
>