[etherlab-users] Syntax error by starting dls (data logging service)

[Ralph Oosterveld]

Hello,

I see something went wrong with the attachment, so here the corresponding
file.
I hope this will help solve the problem.

Thank you in advance,
Ralph Oosterveld


-----Original Message-----
>
> Hello,
>
> When I want to start the data logging service using the next command, I get
> a syntax error.
>
> >> sudo /etc/init.d/dls start
> /etc/init.d/dls: 66 /etc/init.d/dls: Syntax error: "(" unexpected
>
> The dls-file is attached and the following are the things I did before
> according the install documentation.
>
> # tar xjf dls-1.3.1.tar.bz2
> # cd dls-1.3.1
> # ./configure
> # make
> # sudo make install
>
> I don?t have a /etc/sysconfig folder and instead of this I am using
> /etc/default the same I did by installing EtherCAT. So I also edited the
> following files.
>
> [etc/init.d/dls]
> SYSCONFIG=/etc/sysconfig/dls >to> SYSCONFIG=/etc/default/dls
>
> [etc/profile.d/dls]
> . /etc/sysconfig/dls >to> . /etc/default/dls
>
> Then copied by using the next commands.
> # cd /opt/etherlab
> # sudo cp etc/init.d/dls /etc/init.d/dls
> # sudo cp etc/sysconfig/dls /etc/default/dls
> # sudo cp etc/profile.d/dls.sh /etc/profile.d/dls.sh
> # sudo insserv dls
>
> I hope this can be solved.
>
> Thank you in advance,
> *Ralph Oosterveld*
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.etherlab.org/pipermail/etherlab-users/attachments/20140620/3e46baa4/attachment-0001.html
> >
>
> ------------------------------
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20140623/2a203c12/attachment-0004.htm>
-------------- next part --------------
#!/bin/sh

#-----------------------------------------------------------------------------
#
# DLS init script
#
# $Id: init.sh,v 5ddbbb894dc7 2011/08/17 13:21:30 fp $
#
# This file is part of the Data Logging Service (DLS).
#
# DLS is free software: you can redistribute it and/or modify it under the
# terms of the GNU General Public License as published by the Free Software
# Foundation, either version 3 of the License, or (at your option) any later
# version.
#
# DLS is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
# with DLS. If not, see <http://www.gnu.org/licenses/>.
#
#-----------------------------------------------------------------------------

### BEGIN INIT INFO
# Provides:          dls
# Required-Start:    $local_fs $remote_fs $syslog $network
# Should-Start:      $time $ntp msr etherlab
# Required-Stop:     $local_fs $remote_fs $syslog $network
# Should-Stop:       $time $ntp msr etherlab
# Default-Start:     3 5
# Default-Stop:      0 1 2 6
# Short-Description: Data Logging Service
# Description:
### END INIT INFO

#-----------------------------------------------------------------------------

SYSCONFIG=/etc/default/dls

test -r $SYSCONFIG || { echo "$SYSCONFIG not existing";
        if [ "$1" = "stop" ]; then exit 0;
        else exit 6; fi; }

. $SYSCONFIG

#-----------------------------------------------------------------------------

if [ -n "$DLS_USER" ]; then
    DLSD_OPTIONS="-u $DLS_USER $DLSD_OPTIONS"
fi

if [ -n "$DLS_DIR" ]; then
    DLSD_OPTIONS="-d $DLS_DIR $DLSD_OPTIONS"
fi

#-----------------------------------------------------------------------------

DLSD=/opt/etherlab/bin/dlsd
PIDFILE=$DLS_DIR/dlsd.pid
KILL_PARAM="-t600 -p $PIDFILE"

#-----------------------------------------------------------------------------

function exit_success()
{
    if [ -r /etc/rc.status ]; then
        rc_reset
        rc_status -v
        rc_exit
    else
        echo " done"
        exit 0
    fi
}

#-----------------------------------------------------------------------------

function exit_running()
{
    if [ -r /etc/rc.status ]; then
        rc_reset
        rc_status -v
        rc_exit
    else
        echo " running"
        exit 0
    fi
}

#-----------------------------------------------------------------------------

function exit_fail()
{
    if [ -r /etc/rc.status ]; then
        rc_failed
        rc_status -v
        rc_exit
    else
        echo " failed"
        exit 1
    fi
}

#-----------------------------------------------------------------------------

function exit_dead()
{
    if [ -r /etc/rc.status ]; then
        rc_failed
        rc_status -v
        rc_exit
    else
        echo " dead"
        exit 1
    fi
}

#-----------------------------------------------------------------------------

if [ -r /etc/rc.status ]; then
    . /etc/rc.status
    rc_reset
fi

case "$1" in
    start)
        echo -n "Starting DLS Daemon "

        if ! startproc -p$PIDFILE $DLSD $DLSD_OPTIONS > /dev/null; then
            exit_fail
        fi

        sleep 1

        if checkproc -p$PIDFILE $DLSD; then
            exit_success
        else
            exit_fail
        fi
        ;;

    stop)
        echo -n "Shutting down DLS Daemon "

        if killproc $KILL_PARAM $DLSD; then
            exit_success
        else
            exit_fail
        fi
        ;;

    restart)
        $0 stop || exit 1
        $0 start
        ;;

    status)
        echo -n "Checking for DLS Daemon "

        if checkproc -p$PIDFILE $DLSD; then
            exit_running
        else
            exit_dead
        fi
        ;;

    *)
        echo "USAGE: $0 {start|stop|restart|status}"
        ;;
esac

if [ -r /etc/rc.status ]; then
    rc_exit
else
    exit 1
fi

#-----------------------------------------------------------------------------