[etherlab-users] Not PREOP state on EL7201

[Carlos Jiménez Leal]

Hello Florian,

One question, why is this necessary?, without this option i can work 
with many different modules, what is the difference with this module?

Thanks a lot in advance

Regards

A 2014-05-22 09:22, Florian Pose escrigué:
> Hello,
>
> On Thu, May 22, 2014 at 09:15:04AM +0200, Carlos Jiménez Leal wrote:
>> I was working with the latest version of ethercat master, and this
>> option don't appear on the configure, but this option appear in the
>> ethercat-1.5.2.
>
> the latest version is in the stable-1.5 branch. Please use this one 
> for
> projects.

-- 

Carlos Jiménez

ENCOPIM S.L.
Ctra. de Ripollet a Santiga 104, P.I. Els Pinetons
E-08291 RIPOLLET (Barcelona)
Tel: (+34) 935 94 23 47
Fax: (+34) 935 94 64 15

==========================================================
La información contenida en la presente transmisión es confidencial y 
su
uso únicamente está permitido a su(s) destinatario(s). Si Ud. no es la
persona destinataria de la presente transmisión, rogamos nos lo
comunique de manera inmediata por teléfono (+34 935 942 347) y destruya
cualquier copia de la misma (tanto digitales como en papel).

The information contained in this transmission is confidential and is
intended only for the use of the addressee(s). If you are not the
designated recipient of this transmission, please advise us immediately
by telephone (+34 935 942 347) and destroy any copies (digital and
paper).
==========================================================