[etherlab-users] ./configure error

[Jun Yuan]

Hi wuybit,

it seems that linux headers are missing. Try to install the missing headers
with

$ apt-get install linux-headers-2.6.32-5-686

and do ./configure again.

Regards,
Jun


On 30 October 2014 09:25, wuybit <wuybit at 126.com> wrote:

>  Hi,
> The attachment is here
>
> 2014-10-30
>  ------------------------------
>  wuybit
>  ------------------------------
>  *发件人：*Jun Yuan <j.yuan at rtleaders.com>
> *发送时间：*2014-10-29 17:03
> *主题：*Re: [etherlab-users] ./configure error
> *收件人：*"wuybit"<wuybit at 126.com>
> *抄送：*"etherlab-users at etherlab.org"<etherlab-users at etherlab.org>
>
>  Hi Wuybit,
>
> I think the Etherlab actually needs the linux-headers, not necessary the
> whole linux-source.
> It would be nice if you send the "configure" file in your Etherlab1.5.2
> directory as an attachment in the next email,
> and post the output of the following commands on your system.
>
> $ uname -a
> $ ls /usr/src/
> $ ls /lib/modules
> $ ls -l /lib/modules/`uname -r`
>
>
>
> Best Regards,
> Jun
>
>
> On 29 October 2014 08:46, wuybit <wuybit at 126.com> wrote:
>
>>   Hi,
>> I use Debian6.04 and Etherlab1.5.2.
>> When I do ./configure, it comes out that "no linux-source",please
>> --with-linux-dir.
>> I see the /usr/src,but there is nothing.
>> So I do this "apt-get install linux-source", make source code to
>> /usr/src, and then do ./configure.
>> It did't change.
>> How to solve this problem?
>>
>> 2014-10-29
>> ------------------------------
>>  wuybit
>>
>> _______________________________________________
>> etherlab-users mailing list
>> etherlab-users at etherlab.org
>> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20141030/99c97ae3/attachment-0003.htm>