[etherlab-users] AL Status Code Reads 0x00 0x00 even when 'PREOP + E' is reported

[Michael Asher]

Hi;

On what register is the, 'Slave State + E' reported, e.g. 'PREOP + E'?  I am
asking because the AL Status Code for a particular Slave Reads 0x00, 0x00
even when the Master Stack reports, 'PREOP + E' for that Slave.

 

Additionally, what are the Vendor Specific Offsets, just in case a reg_read
of those will turn up the Slaves missing error code information?

 

Thanks;

Michael Asher         

Applications Engineer

 



Outbound scan for Spam or Virus by Barracuda at Delta Tau

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20160408/6dffe7d5/attachment-0002.htm>