[etherlab-users] Simulink-block EL2004 Data Type error

[Oldenbourg, Mitja]

Dear Etherlab users,

I want to use the EL2008 Beckkhoff EtherCAT Digital Output with the Parameters: Vector Input = Disabled ; Sample Time = '0'. When I click Apply I get the error message :

'Error reported by S-function 'ec_slave3' in 'tb/sp/EL2xxx_0': Variable context: PORT_CONFIG.input(1).pdo_data_type Unknown data type'

I have not found any parameters to set the data type.

My question is what causes this error and how can I solve the problem?

I work with:
Matlab 2014b
Etherlab 2.1.0
Ethercat 1.5.2

thank you in advance!

Yours sincerely,
Mitja Oldenbourg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20160111/421d559c/attachment-0002.htm>