[etherlab-users] EL9800 PIC interface configuration problem

[Gavin Lambert]

On 1 September 2016 03:45, quoth Tommaso:
> I am trying to configure the EL9800 board using SSC tool and TwinCAT in
order
> to create an EtherLab application with PIC.

EtherLab is a specific EtherCAT master library, which is different from
TwinCAT or SSC.

Since your question is not related to EtherLab, you are probably best off
asking at the ETG forums (ethercat.org), assuming that you have already
registered there for a Vendor ID.