[etherlab-users] First Steps with ethercat

[Graichen Michael]

Hey Wilhelm,

thanks, I managed it by looking at "./oc_user_example".

Have a nice weekend.

Michael









Michael Graichen
Research & Development

WIPOTEC GmbH
Adam-Hoffmann-Str. 26
67657 Kaiserslautern

T +49.631.34146-0
F +49.631.34146-8640
https://www.wipotec.com


.....................................................................

Weigh Cells | Weighing systems

See our solutions. Visit us at our events
https://www.wipotec-wt.com/en/current-topics/events/

.....................................................................

Legal information:

WIPOTEC GmbH
Management: T. D�ppre, U. Wagner, Dr. W. Schmitz, F. K�hler, J. K�hn
HRB 2317 Kaiserslautern


The information contained in this communication and in any attachments is confidential and is intended solely for the use of the individual or
entity to whom it is addressed and others authorized to receive it. If you are not the intended recipient you are hereby notified that any disclosure,
copying, distribution or taking any action in reliance on the contents of this information is strictly prohibited without the prior written consent of
WIPOTEC GmbH. If you have received this communication in error, please, notify the sender by reply e-mail, and then delete it from your system.

-----Ursprüngliche Nachricht-----
Von: Dr.-Ing. Wilhelm Hagemeister [mailto:hm at igh.de]
Gesendet: Donnerstag, 29. November 2018 15:11
An: Graichen Michael <michael.graichen at wipotec.com>; etherlab-users at etherlab.org
Betreff: Re: [etherlab-users] First Steps with ethercat

Hello Mr Graichen,

you need an application to exchange data with a terminal or to bring it in the operational state. This can not be done with the command line tool. See the examples in the EtherCat-Master repo.

Regards Wilhelm

Am 29.11.2018 um 14:47 schrieb Graichen Michael:
> Hey,
>
>
> but how can I actually set the outputs and read the inputs?
>
>
> Thanks for your help
>
>
> Michael
>