[etherlab-users] Failed to get reference clock time: Input/output error

Gavin Lambert gavin.lambert at tomra.com
Sun Oct 28 22:10:44 CET 2018


This is normal for the first few cycles; it takes several cycles for the reference clock to “sync in”.  It should eventually start working.

This is why there’s a patch in the unofficial patchset to suppress the fprintf error when using the usermode library.

From: Mohsen Alizadeh Noghani
Sent: Friday, 26 October 2018 19:16
To: etherlab-users at etherlab.org
Subject: [etherlab-users] Failed to get reference clock time: Input/output error

Hello everyone.
When I call ecrt_master_reference_clock_time -right after ecrt_master_sync_slave_clocks()- in my userspace code, I get the following error every cycle.
Failed to get reference clock time: Input/output error.
I'm using stable-1.5 branch.
Has anyone been able to resolve this issue?
Best,
Mohsen

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20181028/50fb2f34/attachment-0004.htm>


More information about the Etherlab-users mailing list